How to light fan
Credit goes to Mark Z. (zman) for the great idea and the following pictures:
Mark's web site is: www.woodinvillewonderland.com
Mark built them in halves for easier
storage
The curved pieces are EMT and the lights are fastened (clipped) on 1/4" round
stock.
This is a shot showing the 50 count M5 led's and the colors are alternating (out and back).
This shows the edge of the fan and the spacing so that the wires just reach from row to row.
This shot shows how cramped it can be at the bottom. Mark suggests making the bottom arch a bit bigger to give yourself a bit more room. The bottom clips are all touching each other.
